Linksys RV082 Manuel d'utilisateur télécharger pdf (Page 41)

Chapter 6: Set Up and Configure the Router

System Management Tab - Factory Default

10/100 8-Port VPN Router

pinging the DNS server, or other machine at the ISP’s location. If this test is successful, try pinging devices

outside the ISP. This will show if the problem lies with the ISP’s connection. See Figure 6-26.

Enter the IP address of the device being pinged and click the Go button. The test will take a few seconds to

complete. Once completed, a message showing the results will be displayed at the bottom of the Web browser

window. The results include Packets transmitted / received / loss and Round Trip Time (Minimum, Maximum, and

Average).

Note: Ping requires an IP address. The Router’s DNS Name Lookup tool may be used to find the IP address of a

host.

System Management Tab - Factory Default

The “Factory Default” button can be used to clear all of your configuration information and restore the Router to

its factory default settings. Only use this feature if you wish to discard all other configuration preferences.

Click the Return to Factory Default Setting button if you want to restore the Router to the factory default

settings. See Figure 6-27. After clicking the button, another screen, as shown in Figure 28 will appear. Click OK

to continue. Another screen will appear while the system reboots, as shown in Figure 29.

Figure 6-27: Factory Default

Figure 6-29: System is Rebooting

Figure 6-28: Are You Sure

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 102 103

Pas de commentaire

Linksys RV082 Manuel d'utilisateur Page 41