Linksys SRW2016 Manuel d'utilisateur télécharger pdf (Page 93)

Chapter 5: Using the Web-based Utility for Configuration

Maintenance Tab - File Upload

WebView Switches

Source File Name. Enter the name of the firmware file you want to download.

Destination File Name. Specify the file type, Software Image or Boot Code.

Configuration Download

TFTP Server IP Address. Enter the IP address of the TFTP server.

Source File Name. Enter the name of the configuration file you want to download.

Destination File Name. Specify the file type, Running Configuration or Startup Configuration. The Running

Configuration file holds all startup file commands and commands entered during the current session. The Startup

Configuration file holds the startup file commands needed by the Switch to power on or be rebooted.

Click the Submit button to begin the download of the firmware or configuration file.

Maintenance Tab - File Upload

The File Upload screen lets you upload firmware or a configuration file to a TFTP server. You cannot upload both

at the same time.

Firmware Upload. If you want to upload firmware, click this radio button. If this is selected, then the

Configuration Upload fields will not be available.

Configuration Upload. If you want to upload a configuration file, click this radio button. If this is selected, then

the Firmware Upload fields will not be available.

Software Image Upload

TFTP Server IP Address. Enter the IP address of the TFTP server.

Destination File Name. Enter the software image file path to which the file will be uploaded.

Configuration Upload

TFTP Server IP Address. Enter the IP address of the TFTP server.

NOTE: You can perform only one type of upload at a time.

Figure 5-81: Maintenance - File Upload

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 122 123

Pas de commentaire

Linksys SRW2016 Manuel d'utilisateur Page 93