Linksys SLM224G4S Manuel d'utilisateur télécharger pdf (Page 39)

Chapter 5

Configuration Using the Web-based Utility

24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs

QoS > Queue Settings

The Queue Settings screen is used to define the QoS queue

forwarding types.

QoS > Queue Settings

Strict Priority Indicates that traffic scheduling for the

selected queue is based strictly on the queue priority.

WRR Indicates that traffic scheduling for the selected

queue is based strictly on the WRR.

Queue Displays the queue (1-4) for which the queue

settings are displayed.

WRR Weight Displays the WRR weights to queues.

% of WRR Bandwidth Displays the percentage of

bandwidth assigned to the queue. These values are fixed

and cannot be modified.

Click Save Settings to save the changes, or Cancel

Changes to cancel the changes.

QoS > DSCP Settings

The DSCP Settings screen allows you to map Differentiated

Services Code Point (DSCP) values to specific queues.

DSCP Indicates the DSCP value in the incoming packet.

Select a DSCP value from the drop-down menu to map

that value to the associated queue. You can select the

DSCP value for the High, Medium, and Normal priority

queues. The DSCP values for the Low priority queue are

selected automatically based on the other DSCP values.

Queue The queue (1-4) to which the DSCP value is being

mapped.

Click Save Settings to save the changes, or Cancel

Changes to cancel the changes.

QoS > Bandwidth

The Bandwidth screen allows network managers to define

the bandwidth settings for a specified egress or ingress

interface. Modifying queue scheduling affects the queue

settings globally. The Bandwidth screen is not used with

the Service mode, as bandwidth settings are based on

services.

Queue shaping can be based per queue and/or per

interface. Shaping is determined by the lower specified

value. The queue shaping type is selected in the Bandwidth

screen.

Interface The interface for which the queue shaping

information is displayed. Either select Unit No and select

the unit number and port from the drop-down menus,

or select LAG and select the LAG number from the drop-

down menu.

Enable Ingress Rate Limit Status Indicates if rate limiting

is defined on the interface.

Enable Egress Shaping Rate Indicates if rate limiting is

enabled on the interface.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 76 77

Commentaires sur ces manuels

Pas de commentaire

Linksys SLM224G4S Manuel d'utilisateur Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Linksys SLM224G4S