Linksys SLM224G4S Manuel d'utilisateur télécharger pdf (Page 25)

Chapter 5

Configuration Using the Web-based Utility

24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs

Unit No. The unit (switch) that you are managing. The

default is the Master unit’s number. To manage a different

unit, select its number from the drop-down menu.

Port The port number (preceded by the unit number).

For example, 2/e1 indicates Unit 2, Ethernet Port 1.

Description The user-defined port description.

Administrative Status Select Down to take the port

offline. When Up is selected, the port can be accessed

normally.

Link Status The port’s operational status. The value is

either Up (the port has an active connection) or Down

(the port has no active connection, or has been taken

offline by an administrator).

Speed The port’s configured rate in Mbps.

Duplex The port’s current duplex mode, Half or Full.

MDI/MDIX The port’s MDI/MDIX type. The MDI setting is

used if the port is connected to an end station. The MDIX

setting is used if the port is connected to a hub or another

switch.

Flow Control This is the flow control status of the port. It

is active when the port uses Full Duplex Mode.

Type Displays the port type.

LAG This indicates if the port belongs to a LAG.

Port Configuration

The Port Configuration screen lets you configure a port’s

settings. To use this screen, click Detail in the Detail

column on the Port Settings screen.

Port Management > Port Settings> Port Configuration

The Port Configuration screen contains the following fields

(“Read-only” indicates that a field cannot be edited).

Port The port number. To edit the information for

another port, select the port from the drop-down menu.

(Port numbers consist of either “e” for Ethernet, or “g” for

Gigabit, followed by the appropriate number.)

Description The user-defined port description of up to

64 characters. This field is blank by default.

Port Type (Read-only) The port’s connection type and

speed. The types are:

copper The port has a copper connection.

ComboC The Gigabit port has a copper connection.

ComboF The Gigabit port has a fiber optic

connection.

The port speed is prexed onto the type, for example

10M-copper indicates a 10 Mbps copper connection.

Admin Status The port’s administrative status. Select

either Up or Down to enable or disable traffic forwarding

through the port.

Current Port Status (Read-only) The port’s connection

status, either Up or Down.

Reactivate Suspended Port If the port has been

suspended, select this checkbox to reactivate the port.

Operational Status (Read-only) Displays whether the

port is operational or non-operational.

Admin Speed Use this to manually set the port’s

configured transmission rate in Mbps. You can select 10M,

100M, or 1000M (Gigabit ports only). Before you change

this setting, make sure that Auto Negotiation is disabled.

Current Port Speed (Read-only) The port’s current rate

in Mbps.

Admin Duplex The port’s duplex mode, either Full or

Half.

Current Duplex Mode (Read-only) The port’s current

duplex mode.

Auto Negotiation Select Enable (default) or Disable

to enable or disable Auto-Negotiation on the port. Auto-

Negotiation allows a port to advertise its transmission rate,

duplex mode, and flow control settings to other ports. If

you are using an SFP module on a port, Auto Negotiation

for that port should be set to Disable.

Current Auto Negotiation (Read-only) The port’s current

Auto-Negotiation status.

Admin Advertisement Select the speed(s) and duplex

mode(s) that the port will advertise. The available speeds

are determined by the port type. The following capabilities

are supported.

Max Capability The port advertises all speeds and

duplex mode settings.

•

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 76 77

Commentaires sur ces manuels

Pas de commentaire

Linksys SLM224G4S Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Linksys SLM224G4S