Linksys Router RV042 Manuel d'utilisateur télécharger pdf (Page 24)

There are many settings that must be configured to enable VPN for a dedicated tunnel:

• Tunnel Name. The tunnel name is simply a name for this tunnel

(i.e.VPNtoGalileo)

• Local Group Setup:

o Local Security Gateway Type: IP Only

o IP Address: This will be pre-filled in from the WAN IP address as

previously selected.

o Local Security Group Type: Subnet

o IP Address: The Network address assigned by Galileo. This is usually 1

less than the Router address. (i.e. 10.185.5.160)

o Subnet Mask: Subnet mask provided by Galileo. (i.e.255.255.255.224)

• Remote Security group:

o Remote Security Gateway Type: IP Only

o IP Address: This is the address of the Remote PEER provided by Galileo

(i.e. 198.151.32.16)

o Remote Security group type: Subnet

o IP Address: This is the address of the remote network to get to Galileo

services. This will be one of the following networks:

 57.8.81.0 – Galileo Production Net 1

 198.177.164.0 – Galileo Production Net 2

 167.125.0.0 – Galileo Canada Leisure Link

o Subnet Mask: 255.255.255.0

• IPSec setup: Phase 1

o Keying Mode: IKE with Preshared Key

o Phase 1 DH group: Group 2

o Phase 1 Encryption: 3DES

o Phase 1 Authentication: SHA1

o Phase 1 SA Lifetime: 86400 seconds

• IPSec Setup: Phase 2

Perfect forward Secrecy: Not checked

o Phase 2 DH group: Group 2

o Phase 2 Encryption: 3DES

o Phase 2 Authentication: SHA1

o Phase 2 SA Lifetime: 28800 seconds

o Preshared Key: Provided by Galileo as needed

• Advanced:

o Aggressive Mode: Checked

o Compress (Support IP Payload Compression Protocol(IP Comp)):

Not Checked

o Keep Alive: Checked

o AH Hash Algorithm: Not Checked

o Netbios Broadcast: Not Checked

1 2 ... 19 20 21 22 23 24 25 26

1.4 4
VPN Router (IPSec) 22

Commentaires sur ces manuels

Pas de commentaire

Linksys Router RV042 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Linksys Router RV042