Linksys PAP2-VU Manuel d'utilisateur télécharger pdf (Page 12)

Phone Adapter with 2 Ports for Voice-over-IP

Chapter 3: Connecting the Phone Adapter

Placement Options

There are three ways to place the Phone Adapter. The first way is to place the Phone Adapter horizontally on a

surface. The second way is to stand the Phone Adapter vertically on a surface. The third way is to mount the

Phone Adapter on a wall. The second and third options are explained in further detail below.

Stand Option

1. Remove the plate from the Phone Adapter’s bottom panel.

2. Line up the pegs of the Phone Adapter’s base with the mounting holes of the Phone Adapter’s bottom panel.

3. Insert the Phone Adapter’s base into the Phone Adapter’s bottom panel. Push the base in until it fits snugly.

4. Place the Phone Adapter in an appropriate location.

Congratulations! The installation of the Phone Adapter is complete.

If you need to change any of the Phone Adapter’s network settings, proceed to “Chapter 4: Using the

Phone Adapter’s Interactive Voice Response Menu.”

Figure 3-5: Attaching the Phone

Adapter’s Base

Figure 3-6: Phone Adapter Standing

on Base

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Pas de commentaire

Linksys PAP2-VU Manuel d'utilisateur Page 12